https://community.hpe.com/t5/server-management-systems/thresholds-insight-manager-7-sp2/m-p/3176892#M809 My guess is that SNMP is not configured to send traps to the IM Server.<BR /><BR />From the Services GUI, select SNMP Service and configure Traps. If you've not tweaked IM at all, just configure it to use the Public Community name and the destination is the IM Server. Wed, 28 Jan 2004 16:13:54 GMT Rob Buxton 2004-01-28T16:13:54Z https://community.hpe.com/t5/server-management-systems/thresholds-insight-manager-7-sp2/m-p/3176891#M808 I have recently configured my threshold limits in CIM and yet when the threshold is breached no event is generated to alert me. I can drill down to the device page of the individual server and see the gas gage has changed yellow or red and exceeded the set limits. Any ideas on how to get Insight to start kicking off alerts based on threshold breaches would be appreciated.<BR /> Wed, 28 Jan 2004 16:06:31 GMT https://community.hpe.com/t5/server-management-systems/thresholds-insight-manager-7-sp2/m-p/3176891#M808 Juan Carlos Valencia 2004-01-28T16:06:31Z https://community.hpe.com/t5/server-management-systems/thresholds-insight-manager-7-sp2/m-p/3176892#M809 My guess is that SNMP is not configured to send traps to the IM Server.<BR /><BR />From the Services GUI, select SNMP Service and configure Traps. If you've not tweaked IM at all, just configure it to use the Public Community name and the destination is the IM Server. Wed, 28 Jan 2004 16:13:54 GMT https://community.hpe.com/t5/server-management-systems/thresholds-insight-manager-7-sp2/m-p/3176892#M809 Rob Buxton 2004-01-28T16:13:54Z