https://community.hpe.com/t5/server-management-systems/getting-started/m-p/3447058#M8371 It's the same mechanism as CIM 7, a Discovery Process, primarily ping.<BR />You need to enter the IP Address ranges in the Discovery Section.<BR />All the Server Agents are the same.<BR />You'll need to set up SNMP on the remote Servers to allow the new box access, essential if you have got Allow Selected Hosts Set.<BR /> Mon, 20 Dec 2004 14:12:25 GMT Rob Buxton 2004-12-20T14:12:25Z https://community.hpe.com/t5/server-management-systems/getting-started/m-p/3447057#M8370 Just installed System Insight Manger. Maybe because I’m used to old 7.0 CIM, cannot see how do I scan network for HP machines, or ad them manually. Do I need to install a different agent onall server then the agent I had with SIM 7.0?<BR /><BR />TIA,<BR /><BR />Ronen Mon, 20 Dec 2004 06:45:06 GMT https://community.hpe.com/t5/server-management-systems/getting-started/m-p/3447057#M8370 Ronen Kfir 2004-12-20T06:45:06Z https://community.hpe.com/t5/server-management-systems/getting-started/m-p/3447058#M8371 It's the same mechanism as CIM 7, a Discovery Process, primarily ping.<BR />You need to enter the IP Address ranges in the Discovery Section.<BR />All the Server Agents are the same.<BR />You'll need to set up SNMP on the remote Servers to allow the new box access, essential if you have got Allow Selected Hosts Set.<BR /> Mon, 20 Dec 2004 14:12:25 GMT https://community.hpe.com/t5/server-management-systems/getting-started/m-p/3447058#M8371 Rob Buxton 2004-12-20T14:12:25Z