topic Re: Software Version Control not working in Server Management - Systems Insight Manager

Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 10:50:14 GMT

on the SIM server?!?!?

SNMP is set for "Public" read only, and "Private" read_create. I have made sure even the P's are capitalized in SNMP and HP SIM.

SIM delivered the Support pack to the SIM server without any errors, and I see it installed no the server, but it's not on the SYSTEM home page.

What else should I look for?

I have ran the IDENTIFY, and System Discovery mutliple times, and I even waited 24 hours.

What did I miss?

Thanks.

Re: Software Version Control not working

David Claypool — Wed, 19 Jan 2005 14:27:23 GMT

What's the status of the Version Control Agent under 'Services' ?

Re: Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 14:30:32 GMT

It shows it's "Started"

I am finding that either the Trusts are no longer trusted, or the Version Control Agent is no longer installed on the the various servers.

Is this because of the different versions between 4.1 and 4.2?

Re: Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 14:58:46 GMT

I get the following from my "servers" in the HTTP logs:

"
SECURITY ERROR Severity=1 Wed Jan 19 11:52:34 2005
Invalid Secure Task Execution or Single Login request from 10.x.x.x
Failed signature validation.

"

10.x.x.x is my SIM server.

What is the Login this is referring to?

Re: Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 14:59:21 GMT

I am using a DOMAIN service account, if that helps.

Re: Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 16:51:48 GMT

Hmmm, apparently my server Certs are messed up.

I am not runnning as Trust All, and they work.

But I don't want to Trust All.

Apparently, for some reason my server certs have to be "re-issued".

I will try it...

Re: Software Version Control not working

Nick Hromyak — Wed, 19 Jan 2005 17:34:27 GMT

I was able to re-issue my certificates with the IP address of my SIM server. Using the DNS name didn't seem to work. I did TEST it with the FQDN and that appeared to work as well. But for now, I am using the IP address.

But now I have anohter issue. :(