https://community.hpe.com/t5/server-management-systems/nas-box-detection/m-p/3467599#M9135 We have some new NAS boxes on our network with both w2k and w2k3 on them. They dont have any management agents installed on them, how can i get SIM to recognise and manage them? Thu, 20 Jan 2005 10:27:42 GMT John Considine 2005-01-20T10:27:42Z https://community.hpe.com/t5/server-management-systems/nas-box-detection/m-p/3467599#M9135 We have some new NAS boxes on our network with both w2k and w2k3 on them. They dont have any management agents installed on them, how can i get SIM to recognise and manage them? Thu, 20 Jan 2005 10:27:42 GMT https://community.hpe.com/t5/server-management-systems/nas-box-detection/m-p/3467599#M9135 John Considine 2005-01-20T10:27:42Z https://community.hpe.com/t5/server-management-systems/nas-box-detection/m-p/3467600#M9136 From the HP SIM readme at <A href="http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/readme.txt" target="_blank">http://www.hp.com/wwsolutions/misc/hpsim-helpfiles/readme.txt</A><BR /><BR />"To discover and properly identify SNMP based HP NAS systems, you <BR />must add the cpqPublic community string on the Global Protocol <BR />Settings page. To access the Global Protocol Settings page, select<BR />Options&gt;Protocol Settings&gt;Global Protocol Settings."<BR /><BR />If the products are the NAS 500, 1200, 1500 or the (new names for them) ProLiant Storage System based on the ML110 or DL100, these systems run Windows Storage Server and can be recognized by HP SIM through WMI. Make sure you have the WMI Mapper enabled and the WBEM login/password information included in Global Protocol Settings. Thu, 20 Jan 2005 12:50:40 GMT https://community.hpe.com/t5/server-management-systems/nas-box-detection/m-p/3467600#M9136 David Claypool 2005-01-20T12:50:40Z