https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153511#M92 After adding a new Proliant G3 DL380 with the integrated light's out and the advance pack loaded it shows up as a ? mark. Clicking on the ? mark brings up the included file....the only one i think i might be affected by is F. how do i correct that? is anyone else having this problem....any ideas?<BR /><BR />thanks. Mon, 29 Dec 2003 17:26:44 GMT Dan Brinkmann_1 2003-12-29T17:26:44Z https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153511#M92 After adding a new Proliant G3 DL380 with the integrated light's out and the advance pack loaded it shows up as a ? mark. Clicking on the ? mark brings up the included file....the only one i think i might be affected by is F. how do i correct that? is anyone else having this problem....any ideas?<BR /><BR />thanks. Mon, 29 Dec 2003 17:26:44 GMT https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153511#M92 Dan Brinkmann_1 2003-12-29T17:26:44Z https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153512#M93 Did you add the IP for the ILO as well? You should have two devices, one for the Server and one for the ILO, and then they should sort of attach to one another. Also make sure the ILO firmware is the latest, I've had problems in the past where the ILO's don't know what server they belong to if they're not the latest firmware. Tue, 30 Dec 2003 09:00:46 GMT https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153512#M93 James Kennedy_4 2003-12-30T09:00:46Z https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153513#M94 That was it, thanks! Tue, 30 Dec 2003 09:42:26 GMT https://community.hpe.com/t5/server-management-systems/mp-rib-not-showing-up/m-p/3153513#M94 Dan Brinkmann_1 2003-12-30T09:42:26Z