https://community.hpe.com/t5/server-management-systems/sim-4-2-and-old-hp-netserver/m-p/3469636#M9259 I am not an expert on these devices, but my guess is that if the TopTools agents send SNMP alerts, then you should be able to forward them to the SIM server.<BR /><BR />Setup your SNMP settings in Windows like you would on a Proliant device (for example, the correct Community name and SNMP trap destination addresses) and then configure TopTools to "create" SNMP events. Not sure how to do that - maybe it is built in by default. Mon, 24 Jan 2005 17:01:46 GMT NJK-Work 2005-01-24T17:01:46Z https://community.hpe.com/t5/server-management-systems/sim-4-2-and-old-hp-netserver/m-p/3469635#M9258 I've add in my SIM some old HP server (LC3, LH4 and so on...). On these servers i've installed HP Toos and agents vs. 5.5 <BR />Servers are correctly recognized in SIM (model, os, etc...) but SIM is not able to receive hardware alarms. Is it possibile to do this ? Do I have to install additional agent in client server to notify SIM or modify existant configuration ? Many thanks in advance Mon, 24 Jan 2005 10:07:10 GMT https://community.hpe.com/t5/server-management-systems/sim-4-2-and-old-hp-netserver/m-p/3469635#M9258 Fab_3 2005-01-24T10:07:10Z https://community.hpe.com/t5/server-management-systems/sim-4-2-and-old-hp-netserver/m-p/3469636#M9259 I am not an expert on these devices, but my guess is that if the TopTools agents send SNMP alerts, then you should be able to forward them to the SIM server.<BR /><BR />Setup your SNMP settings in Windows like you would on a Proliant device (for example, the correct Community name and SNMP trap destination addresses) and then configure TopTools to "create" SNMP events. Not sure how to do that - maybe it is built in by default. Mon, 24 Jan 2005 17:01:46 GMT https://community.hpe.com/t5/server-management-systems/sim-4-2-and-old-hp-netserver/m-p/3469636#M9259 NJK-Work 2005-01-24T17:01:46Z