https://community.hpe.com/t5/server-management-systems/thin-clients-in-hp-sim/m-p/3478401#M9651 I have a network with several HP CE and xp-e machines. When making a fresh installation of HPSIM 4.2 they all appear unmanaged even if all the CE-machines are configured for SNMP. Are there any MIBs or something to install into SIM to get them all viewable? Fri, 04 Feb 2005 03:07:43 GMT Kenny Fransson 2005-02-04T03:07:43Z https://community.hpe.com/t5/server-management-systems/thin-clients-in-hp-sim/m-p/3478401#M9651 I have a network with several HP CE and xp-e machines. When making a fresh installation of HPSIM 4.2 they all appear unmanaged even if all the CE-machines are configured for SNMP. Are there any MIBs or something to install into SIM to get them all viewable? Fri, 04 Feb 2005 03:07:43 GMT https://community.hpe.com/t5/server-management-systems/thin-clients-in-hp-sim/m-p/3478401#M9651 Kenny Fransson 2005-02-04T03:07:43Z https://community.hpe.com/t5/server-management-systems/thin-clients-in-hp-sim/m-p/3478402#M9652 UnManaged means HPSIM has not been able to interrogate the computers with any of the protocols it tries.<BR />If SNMP was configured to allow connection you would get Unknown if it could not tell what kind of computer it was.<BR />Check SNMP is not configured to "Allow Selected Hosts Only" and is not including the HPSIM Server. Sun, 06 Feb 2005 15:09:19 GMT https://community.hpe.com/t5/server-management-systems/thin-clients-in-hp-sim/m-p/3478402#M9652 Rob Buxton 2005-02-06T15:09:19Z