https://community.hpe.com/t5/server-management-systems/error-shooting-many-servers-at-once-using-sim-4-2/m-p/3486497#M9972 I have a case opened up with HP, ( hope it is escalated) which involves SIM. I have attached a text file showing my problem. It appears we cannot shoot multiple servers at a clip, when I run 5 or 10 in a batch, only the first one gets updated then I get this message:<BR /><BR /><BR />HP Remote Deployment Console Utility<BR /><BR />-------------------------------------------------------------------------------<BR /><BR />Initializing...<BR /><BR /><BR />Unable to connect to the target computer. All available connection methods were<BR />attempted with no success.<BR /><BR />A possible reason is that the operating system of the target computer is not sup<BR />ported. Either the username is unknown, or a bad password was provided.<BR /><BR />Unknown Initialization Error!<BR /><BR />I use both initial support paq install and the normal install software/firmware option. We need to shoot 200 servers by this weekend before our cyber center cut-over. Can you help out this poor soul??? Many thanks<BR /><BR />Mike.<BR /> Tue, 15 Feb 2005 17:43:21 GMT Mike Strako 2005-02-15T17:43:21Z https://community.hpe.com/t5/server-management-systems/error-shooting-many-servers-at-once-using-sim-4-2/m-p/3486497#M9972 I have a case opened up with HP, ( hope it is escalated) which involves SIM. I have attached a text file showing my problem. It appears we cannot shoot multiple servers at a clip, when I run 5 or 10 in a batch, only the first one gets updated then I get this message:<BR /><BR /><BR />HP Remote Deployment Console Utility<BR /><BR />-------------------------------------------------------------------------------<BR /><BR />Initializing...<BR /><BR /><BR />Unable to connect to the target computer. All available connection methods were<BR />attempted with no success.<BR /><BR />A possible reason is that the operating system of the target computer is not sup<BR />ported. Either the username is unknown, or a bad password was provided.<BR /><BR />Unknown Initialization Error!<BR /><BR />I use both initial support paq install and the normal install software/firmware option. We need to shoot 200 servers by this weekend before our cyber center cut-over. Can you help out this poor soul??? Many thanks<BR /><BR />Mike.<BR /> Tue, 15 Feb 2005 17:43:21 GMT https://community.hpe.com/t5/server-management-systems/error-shooting-many-servers-at-once-using-sim-4-2/m-p/3486497#M9972 Mike Strako 2005-02-15T17:43:21Z https://community.hpe.com/t5/server-management-systems/error-shooting-many-servers-at-once-using-sim-4-2/m-p/3486498#M9973 Hi Mike,<BR /><BR />Do you have SNMP and WBEM setup correctly? Also does the WBEM account have local admin on each server? Mon, 22 Aug 2005 06:43:00 GMT https://community.hpe.com/t5/server-management-systems/error-shooting-many-servers-at-once-using-sim-4-2/m-p/3486498#M9973 Harry Galanos 2005-08-22T06:43:00Z