https://community.hpe.com/t5/storeonce-backup-storage/vls-12000-monitoring/m-p/4311941#M216 I have a customer using isee and would like to set up monitoring for his virtual library. I was told that OSEM is the way to monitor through the commandview interface. Is there another way other than SNMP traps? Do you configure isee/webes/osem like you would for an eva being managed by commandview. I don't have any experience with virtual tape arrays other than knowing it is attached to an EVA8100. Thanks in advance. Mon, 24 Nov 2008 16:26:51 GMT Alice Seeley 2008-11-24T16:26:51Z https://community.hpe.com/t5/storeonce-backup-storage/vls-12000-monitoring/m-p/4311941#M216 I have a customer using isee and would like to set up monitoring for his virtual library. I was told that OSEM is the way to monitor through the commandview interface. Is there another way other than SNMP traps? Do you configure isee/webes/osem like you would for an eva being managed by commandview. I don't have any experience with virtual tape arrays other than knowing it is attached to an EVA8100. Thanks in advance. Mon, 24 Nov 2008 16:26:51 GMT https://community.hpe.com/t5/storeonce-backup-storage/vls-12000-monitoring/m-p/4311941#M216 Alice Seeley 2008-11-24T16:26:51Z