HP B6200 CONFIGURATION - MANAGEMENT CONSOLE SETUP

Kumdist — Mon, 11 Nov 2013 00:58:54 GMT

I have a new B6200 which came factory integrated. However, I had a hardtime getting the management console setup for access on my network.

Following the Recommended Configuration Guidelines & the CLI Reference Guide, I seleted template 5 which suited my network.

Connecting directly to Node1, logging on using the default Admin account, i ran net set config TEMPLATE5

,put in all the required network details and had the "Login to the management console address at xxx.xxx.xxx.xxx (192.168.13.2)" appear on the monitor.

However, I wasnt able to ping or connect to the management console at all. Does it take a while to apply or is there any thing i missed? Even after 24 hrs now, still no change.

i retried the setup for another 4 times and still no luck. Are there any commands I need to run apart from the net set config TEMPLATEx?

Re: HP B6200 CONFIGURATION - MANAGEMENT CONSOLE SETUP

Emil Velez_2 — Fri, 06 Dec 2013 21:08:09 GMT

on my systems we use 2 networks. the 172.186 network and the 192.168 network.. By default I had the fusion manager running on the 172.186 network.. I wanted to also have a fusion manager on the 192 network.

I found this command to do it.
research it and look it over.

Ibrix_fm –c 192.168.71.190 -d bond1:0 –n 255.255.0.0 –v user

topic Re: HP B6200 CONFIGURATION - MANAGEMENT CONSOLE SETUP in StoreOnce Backup Storage

HP B6200 CONFIGURATION - MANAGEMENT CONSOLE SETUP

Re: HP B6200 CONFIGURATION - MANAGEMENT CONSOLE SETUP