topic Re: OA Password reset in BladeSystem - General

OA Password reset

ess — Mon, 10 May 2010 02:23:46 GMT

hi all
i have one OA model is kvm support.
i forget password.how to reset password default?
i connect to oa whit cable console and set the setting whit hyper terminal when hold reset button 5 sec but when boot ao not show lp for reset password why?
please help.

Re: OA Password reset

Michal Kapalka (mikap) — Tue, 31 Oct 2023 14:55:04 GMT

hi,

check this link : https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c00705292

search for :

"Recovering the administrator password"

or go directly to page 20.

mikap

[Moderator edit: Updated the broken link]

Re: OA Password reset

ess — Mon, 10 May 2010 05:40:22 GMT

hi
tanks for help but not useful because i set this step but not show the command l or lp for reset password.

Re: OA Password reset

Mapeva — Sun, 16 May 2010 17:54:40 GMT

Try to disconnect and and reconnect the OA's tray (The device that holds the OA) I had a similar problem were the OA didn't show the password after pressing LP.
You will have to remove the OA's, but it's OK, the enclosure should be able to run without afecting the server.

Let us know if this worked or not