topic Re: RAM config in BL460 in BladeSystem - General

RAM config in BL460

SteveC_1 — Wed, 26 May 2010 09:11:27 GMT

Hi all,

I currently have 32GB RAM in a BL460 G1 Blade made up from 8x 4GB modules.

Can I buy an 8x 8GB kit and put replace just two 4GB for 8GB DIMMs in 4 blades? I know you can put in 8x 8GB DIMMs but wondered if you can mix and match (assuming I stay in pairs).

If it makes any difference I have 80W CPUs.

Cheers,
Steve

Re: RAM config in BL460

Matt Palmer_2 — Wed, 26 May 2010 10:09:50 GMT

Hi,

a really helpful tool for you for these kinds of questions is the HP product Bulletin program.

It lists all details and possible configurations of machines, and it helps you work out the costs.

http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#intro

from the quick glance PC2-5300 DDR2-667

64 GB RAM for 80W processors and below. 64Gb not supported on 120W processors.

Up to 3 16Gb (2x8GB) mem option kits or 48 GB mem on 120W processors.

standard 1GB (2x512MB)
2GB (2x1GB)
64GB (8x8GB)

hope that helps. would recommend the product bulletin for your own benefit

regards

Matt

Re: RAM config in BL460

Matt Palmer_2 — Wed, 26 May 2010 10:27:30 GMT

complete options are:

1GB FBD PC2-5300 (2 x 512MB)kit
2GB FBD PC2-5300 (2 x 1GB LP)kit
2GB FBD PC2-5300 (2 x 1GB)kit
4GB FBD PC2-5300 (2x2 GB LP)kit
4GB FBD PC2-5300 (2x2 GB)kit
8GB FBD PC2-5300 (2x4 GB)kit
8GB FBD PC2-5300 (2x4GB LP)kit
16GB FBD PC2-5300 (2 x8GB) kit
64GB FBD PC2-5300 (8x8 GB) kit

hth

regards

Matt

Re: RAM config in BL460

SteveC_1 — Wed, 26 May 2010 10:30:14 GMT

Thanks guys. Downloading the Bulletin now.

So is it OK to have:

3x 8GB FBD PC2-5300 (2x4 GB)kit
1x 16GB FBD PC2-5300 (2 x8GB) kit

Installed?

Cheers,
Steve

Re: RAM config in BL460

Matt Palmer_2 — Wed, 26 May 2010 10:38:43 GMT

Hi Steve,

you need to look at the requirements for the way you want the RAM cfg to work.

I think there is a diagram on the underside of the blade topcover, which should detail the different configurations, and what you need to do the have Error correction or redundant RAM/interleaving,etc.

there are certainly enough slots to do that, but for interleaving,etc I believe all the pairs need to be the same size.

please assign points if you found my replies helpful

regards

Matt

Re: RAM config in BL460

marcus1234 — Fri, 28 May 2010 17:27:59 GMT

Hm steve the ram config tool is buggy and incorrect at the best of time follow this doc click on the memory tab

it will gave spare numbers and configurations too

http://vb.net/products/HP/12518_div.html#Memory

enjoy :)