topic Re: Virtual connect Blade Unknown in BladeSystem - General

Virtual connect Blade Unknown

Aissa — Tue, 15 Jun 2010 06:33:59 GMT

Hi all,

When i connect a blade 460G6 or change it from a bay to another one on the C7000 my Blades is shown as unknown.i have to restart VC so my Blades is see correctly.

Do you have any idea about that

Re: Virtual connect Blade Unknown

JKytsi — Tue, 15 Jun 2010 07:42:30 GMT

I would start by checking FW levels
- VC
- blade (BIOS,ILO)
- OA

Re: Virtual connect Blade Unknown

Gerardo Arceri — Tue, 15 Jun 2010 19:44:26 GMT

Definitely, you need a firmware upgrade According to the following document:
http://h18004.www1.hp.com/products/blades/components/c-class.html

"Note 2: If you are using G6 ProLiant server blades in an enclosure (with or without G1 or G5 server blades), you are required to upgrade to the OAv2.51 compatibility column below. Using OA v2.51 MUST have the latest ROM and iLO versions installed. "

Regards, and don't forget to assign points.!