https://community.hpe.com/t5/bladesystem-general/array-not-rebuilding/m-p/4657705#M10845 Hi,<BR /><BR />I have a bl320 blade with a 5i controller. two disks are configured as raid 1+0. One drive has failed.<BR /><BR />i hve replace the drive but the issue is that it is not rebuilding. When i look at the array in ACU it show the array (array A) and then two disks under the array. One of the disk has a + sign on the disk and the other is not shown. Instead it says Unused space,???<BR /><BR />The new drive that i have put into the blade shows up as an unassigned drive! i need to add this to the array.<BR /><BR />Anybody got any ideas<BR /><BR />Thanks<BR /> Tue, 06 Jul 2010 21:41:46 GMT phillbl1 2010-07-06T21:41:46Z https://community.hpe.com/t5/bladesystem-general/array-not-rebuilding/m-p/4657705#M10845 Hi,<BR /><BR />I have a bl320 blade with a 5i controller. two disks are configured as raid 1+0. One drive has failed.<BR /><BR />i hve replace the drive but the issue is that it is not rebuilding. When i look at the array in ACU it show the array (array A) and then two disks under the array. One of the disk has a + sign on the disk and the other is not shown. Instead it says Unused space,???<BR /><BR />The new drive that i have put into the blade shows up as an unassigned drive! i need to add this to the array.<BR /><BR />Anybody got any ideas<BR /><BR />Thanks<BR /> Tue, 06 Jul 2010 21:41:46 GMT https://community.hpe.com/t5/bladesystem-general/array-not-rebuilding/m-p/4657705#M10845 phillbl1 2010-07-06T21:41:46Z