topic Re: VCEM in BladeSystem - General

VCEM

farhat_1 — Tue, 21 Sep 2010 14:31:36 GMT

Dear Users

We are using Virtual connect enterprise manager (VCEM) for managing the virtual connect.

VCEM has two domain.

Recently we had a power shut down activity and had to power down both the enclosure.

After powering the enclosure when we logged into the VCEM page it showed Configuration mismatch. as per the VCEM user guide they have asek to resynchronise the VC domain and to resynchronise the VC doamin it has to be in VC maintenance mode, but this maintenence mode is grayed out, kindly let us know how cn we enable the VC maintenence tab.

Re: VCEM

JKytsi — Tue, 21 Sep 2010 17:15:15 GMT

Discover the OA and Virtual Connect IPs again in SIM.

Re: VCEM

farhat_1 — Fri, 24 Sep 2010 05:56:49 GMT

From the SIM we need click configure and repair and manually select the discovery of the active OA and the primary virtual connect of the enclosure. Is this right

Re: VCEM

JKytsi — Fri, 24 Sep 2010 07:23:52 GMT

Yes, VCEM talks to primary OA/VC module and during failover it needs to re-discover

Re: VCEM

farhat_1 — Fri, 24 Sep 2010 12:34:31 GMT

will the rediscovery disrupt any of the VCEM functionality.

Re: VCEM

JKytsi — Fri, 24 Sep 2010 12:35:47 GMT

No.

Re: VCEM

farhat_1 — Fri, 24 Sep 2010 12:39:15 GMT

thanks for the prompt reply as the system are in production once done I will reply back.

Re: VCEM

JKytsi — Fri, 24 Sep 2010 12:53:16 GMT

Please do so. And do not forget to assign point to answers (if those helped You).