topic Re: NC 532i DP Virtual Adapter error code 10 in BladeSystem - General

NC 532i DP Virtual Adapter error code 10

Jose Mafra_1 — Tue, 21 Sep 2010 21:42:59 GMT

On BL460C-G6 after upgrade NC532i firmware to v2.1.5.9, Windows 2003 R2 detect tree NC532i DP Virtual Adapter with error code 10 (!) and two with no problem on device manager's system devices. I also installed the latest drivers 5.2.22 but the problem is the same.
I tried to delete the diveces manually but the problem persists.

Has someone had this problem ?
How do I fix this?
Thanks

Re: NC 532i DP Virtual Adapter error code 10

BorysG — Thu, 23 Sep 2010 13:58:10 GMT

First of all - try "uninstall" driver of this adapters (not delete).

Do You use Virtual Connect? If yes try unassign and assign (reassign) corresponding profile.

Re: NC 532i DP Virtual Adapter error code 10

BorysG — Fri, 24 Sep 2010 08:52:17 GMT

I seen this problem today.. Fixed by reboot of server (also, I reassign server profile, but I think this is not needed)

Re: NC 532i DP Virtual Adapter error code 10

Jose Mafra_1 — Fri, 24 Sep 2010 10:02:30 GMT

Thanks BorysG,

I tryed to uninstall via device manager item right click uninstall option, but the problem is the same.
The HP package cp013079.exe doesn't have um uninstall option.
Already try reboot but when windows start installing de netwok devices is always the same.

What do you mean by reassign the profile?

Re: NC 532i DP Virtual Adapter error code 10

BorysG — Fri, 24 Sep 2010 10:25:06 GMT

Reassign - 2 step action.
1. Unassign profile from Bay
2. Assign profile on the same bay.

It is true only if You use Virtual Connect.

Re: NC 532i DP Virtual Adapter error code 10

Jose Mafra_1 — Fri, 24 Sep 2010 13:51:53 GMT

OK, but I'm not using virtual connect.

Re: NC 532i DP Virtual Adapter error code 10

BorysG — Fri, 24 Sep 2010 14:23:36 GMT

Our trouble invokes some times after reboot server. Symptoms like Yours - some NC532i DP Virtual Adapters with error code 10, and not all NICs showed. Another reboot solve problem.

I was unteam adapter and uninstall NCU. After install NCU again, team adapters and problem not shown anymore.