https://community.hpe.com/t5/bladesystem-general/invalid-character-was-found-in-text-content-error-processing/m-p/4693320#M11537 Hi,<BR /><BR />I have around 120 BL460c G1 servers, all using the same firmware &amp; software versions across the board.<BR /><BR />We use HP SIM 6.0 to monitor the servers, and all but one server gets identified correctly in hp sim.<BR /><BR />When trying to identify the server in HP Sim, i get this message :<BR /><BR />Status: Completed with minor errors <BR /><BR />"The discovered server is not associated with its management processor.<BR />Verify that the supported HP Insight Management Agents or WBEM providers are installed on the server, and verify that the<BR />management processor has been discovered in HP SIM"<BR /><BR />After searching for the above error message, i found a post asking me to check the "Configure Insight Manager Integration" in the ILO2 interface.<BR /><BR />Here i get this error message when clicking on "View XML Reply" under Administration | Settings | Management :<BR /><BR />The XML page cannot be displayed <BR />Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. <BR /><BR /><BR />--------------------------------------------------------------------------------<BR /><BR />An invalid character was found in text content. Error processing resource 'https://ilo_dns_name/xmldata?item=All'. Line...<BR /><BR /><RIMP><HSI><SBSN>xxxxxxxxxx </SBSN><SPN>ProLiant BL460c G1&lt;..."<BR />(i have changed the serial number to xxx only in this forum post)<BR /><BR />Any ideas as to what i can do to correct this?<BR /><BR />Many thanks for any replies.<BR /><BR />Br<BR />Pgustavsson<BR /></SPN></HSI></RIMP> Thu, 30 Sep 2010 10:58:02 GMT pgustavsson 2010-09-30T10:58:02Z https://community.hpe.com/t5/bladesystem-general/invalid-character-was-found-in-text-content-error-processing/m-p/4693320#M11537 Hi,<BR /><BR />I have around 120 BL460c G1 servers, all using the same firmware &amp; software versions across the board.<BR /><BR />We use HP SIM 6.0 to monitor the servers, and all but one server gets identified correctly in hp sim.<BR /><BR />When trying to identify the server in HP Sim, i get this message :<BR /><BR />Status: Completed with minor errors <BR /><BR />"The discovered server is not associated with its management processor.<BR />Verify that the supported HP Insight Management Agents or WBEM providers are installed on the server, and verify that the<BR />management processor has been discovered in HP SIM"<BR /><BR />After searching for the above error message, i found a post asking me to check the "Configure Insight Manager Integration" in the ILO2 interface.<BR /><BR />Here i get this error message when clicking on "View XML Reply" under Administration | Settings | Management :<BR /><BR />The XML page cannot be displayed <BR />Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later. <BR /><BR /><BR />--------------------------------------------------------------------------------<BR /><BR />An invalid character was found in text content. Error processing resource 'https://ilo_dns_name/xmldata?item=All'. Line...<BR /><BR /><RIMP><HSI><SBSN>xxxxxxxxxx </SBSN><SPN>ProLiant BL460c G1&lt;..."<BR />(i have changed the serial number to xxx only in this forum post)<BR /><BR />Any ideas as to what i can do to correct this?<BR /><BR />Many thanks for any replies.<BR /><BR />Br<BR />Pgustavsson<BR /></SPN></HSI></RIMP> Thu, 30 Sep 2010 10:58:02 GMT https://community.hpe.com/t5/bladesystem-general/invalid-character-was-found-in-text-content-error-processing/m-p/4693320#M11537 pgustavsson 2010-09-30T10:58:02Z https://community.hpe.com/t5/bladesystem-general/invalid-character-was-found-in-text-content-error-processing/m-p/4693321#M11538 Hi,<BR /><BR />I found the issue with the "invalid character" message.<BR /><BR />When HP changed the systemboard on this server, they entered some garbage charachters into the product-id field in the bios.<BR /><BR />Changed these to the correct product id, and now the xml info can be displayed correctly again.<BR /><BR /> Fri, 01 Oct 2010 09:10:28 GMT https://community.hpe.com/t5/bladesystem-general/invalid-character-was-found-in-text-content-error-processing/m-p/4693321#M11538 pgustavsson 2010-10-01T09:10:28Z