https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080959#M1165 And keep in mind that trunks will increase the _aggregate_ throughput. If you need an individual connection to go faster you will need to upgrade to 10G. Fri, 05 Oct 2007 11:33:23 GMT rick jones 2007-10-05T11:33:23Z https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080957#M1163 Hi,<BR />I have two HP BLc Bnt 1GbE2 swtiches to be installed in C7000 enclosure. Can I increase Up link bandwith by just plugging more cables in Uplink ports or there are some other configurations which I have to made.<BR /><BR />Secondly how can I configure redundancy in Uplinks as well as among switches. Thu, 04 Oct 2007 02:26:51 GMT https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080957#M1163 Aamir Majeed 2007-10-04T02:26:51Z https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080958#M1164 You need to create port trunk for the uplinks. Thu, 04 Oct 2007 06:03:06 GMT https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080958#M1164 JKytsi 2007-10-04T06:03:06Z https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080959#M1165 And keep in mind that trunks will increase the _aggregate_ throughput. If you need an individual connection to go faster you will need to upgrade to 10G. Fri, 05 Oct 2007 11:33:23 GMT https://community.hpe.com/t5/bladesystem-general/how-to-increase-bandwidth-in-c7000-enclosure/m-p/4080959#M1165 rick jones 2007-10-05T11:33:23Z