https://community.hpe.com/t5/bladesystem-general/bl465c-g7-flex-10-netapp-iscsi/m-p/4706187#M11822 We have taken delivery of the new BL465c G7 with Emulex UCNA OneConnect10100 / Flex-10 HP551I, and failing to make an Iscsi connection between the Flex-10 and the Netapp iscsi target ( cannot ping). Tried all options from OneCommand manager without joy.<BR />Tested various scenarios as follows:<BR />Flex-10 to Netapp = failed<BR />Flex-10 to Openfiler= ok<BR />Microsoft sw iscsi to Netapp = ok<BR />All the latest firmware is in place.<BR />Has anyone used this combination of hardware with success? HP Support will not assist as this involves Netapp !<BR /> Thu, 28 Oct 2010 09:51:37 GMT taylormak 2010-10-28T09:51:37Z https://community.hpe.com/t5/bladesystem-general/bl465c-g7-flex-10-netapp-iscsi/m-p/4706187#M11822 We have taken delivery of the new BL465c G7 with Emulex UCNA OneConnect10100 / Flex-10 HP551I, and failing to make an Iscsi connection between the Flex-10 and the Netapp iscsi target ( cannot ping). Tried all options from OneCommand manager without joy.<BR />Tested various scenarios as follows:<BR />Flex-10 to Netapp = failed<BR />Flex-10 to Openfiler= ok<BR />Microsoft sw iscsi to Netapp = ok<BR />All the latest firmware is in place.<BR />Has anyone used this combination of hardware with success? HP Support will not assist as this involves Netapp !<BR /> Thu, 28 Oct 2010 09:51:37 GMT https://community.hpe.com/t5/bladesystem-general/bl465c-g7-flex-10-netapp-iscsi/m-p/4706187#M11822 taylormak 2010-10-28T09:51:37Z