c3000 with optional KVM Module

Dave Reeves — Wed, 10 Nov 2010 22:32:53 GMT

I have recently installed a c3000 blade chassis with a single Prolint BL460c G6 server running Server 2008. I have connected my work stations via a ATEN Altuscn KVM switch into the HP KVM switch on the back of the chassis. When I connect to the server, the graphics are slightly degraded, the video update rate is deminished and the mouse movement is choppy and lags.

If I hook up the same ATEN switch location using the blade KVM connection on the front of the blade the video and mouse issues go away.

If I hook up a mouse / keyboard / video directly to the KVM on the chassis, I get the same issues with the video and mouse operation.

I have had HP send me a replacement KVM and I still have the same issue with video and mouse operation.

Has anyone else run into this problem using the KVM setup I describe? Is the HP KVM not a reliable KVM?

I plan on using this Blade as a view node for a Building Managment System and need constant operator use of this blade.

Any suggestions would be appreciated.

Thanks...

Re: c3000 with optional KVM Module

Suman_1978 — Tue, 14 Dec 2010 07:18:54 GMT

Hi,

If this issue still ongoing, can you tell us what is the Altusen KVM model and HP KVM model?

Thanks

topic Re: c3000 with optional KVM Module in BladeSystem - General

c3000 with optional KVM Module

Re: c3000 with optional KVM Module