https://community.hpe.com/t5/bladesystem-general/problem-in-network-teaming/m-p/4730853#M12329 I'm having BL480c G1 and during an activity i swapped its Mezz 1 card with Mezz 2 to align it to new destination enclosure. Post movement i observed that ports of MEZZ 2 cards were not recognised by teaming software on Windows 2003 SP2 OS. <BR /><BR />Is this expected behaviour of Mezz card swapping or there is some other potential issue. Mon, 27 Dec 2010 11:41:52 GMT Bahl Ripon 2010-12-27T11:41:52Z https://community.hpe.com/t5/bladesystem-general/problem-in-network-teaming/m-p/4730853#M12329 I'm having BL480c G1 and during an activity i swapped its Mezz 1 card with Mezz 2 to align it to new destination enclosure. Post movement i observed that ports of MEZZ 2 cards were not recognised by teaming software on Windows 2003 SP2 OS. <BR /><BR />Is this expected behaviour of Mezz card swapping or there is some other potential issue. Mon, 27 Dec 2010 11:41:52 GMT https://community.hpe.com/t5/bladesystem-general/problem-in-network-teaming/m-p/4730853#M12329 Bahl Ripon 2010-12-27T11:41:52Z https://community.hpe.com/t5/bladesystem-general/problem-in-network-teaming/m-p/4730854#M12330 Hi Bahl,<BR /><BR />what is the model of Mezz cards being used in this server?<BR /><BR />have you disabled the teaming before carring out this movement?<BR /><BR />NIC driver version and NCU version?<BR /><BR />thanks,<BR />Aftab Mon, 27 Dec 2010 12:47:21 GMT https://community.hpe.com/t5/bladesystem-general/problem-in-network-teaming/m-p/4730854#M12330 Ali 2010-12-27T12:47:21Z