topic port X0 stacking link absent in BladeSystem - General

port X0 stacking link absent

lucx — Thu, 20 Jan 2011 09:29:34 GMT

hello all,
i have a BladeSystem c7000 Enclosure G2 with:
12) ProLiant BL460c G6
2) HP VC Flex-10 Enet Module (Firmware Version 3.15)
2) HP VC 8Gb 20-Port FC Module (Firmware Version 1.41).

With Virtual Connetc Manager i have imported the OA Enclosure and configured Domain, Network ad Fibre Channel.

But from Virtual Connect Manager under stacking link i not see the port X0 stacking but only the :Bay1:PortX7 to Bay2:PortX7.

There is something wrong or is this normal?

sorry for my English, but I'm Italian :-)

thanks in advance to all

Re: port X0 stacking link absent

ChrisTan_1 — Thu, 20 Jan 2011 11:30:36 GMT

Hi,

stacking for FC Flex-10 is on port X7 and X8. If you configure X7 and X8 as uplinks or insert SFP in them, then they do not stack. This is different from VC 1/10 module.

So this is normal.

Re: port X0 stacking link absent

lucx — Thu, 20 Jan 2011 11:44:41 GMT

Hi Chris,
ok!
thanks for your answer!