topic Install VMWare ESXi 4.1 on BL460C G7 Fails in BladeSystem - General

Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Thu, 27 Jan 2011 16:46:29 GMT

I am unable to install VMWare ESXi 4.1 on a HP Proliant 460c G7 blade. I have been able to install on the previous G6 series servers. On my first attempt, I got a vmfs error. I was then told to download and use the HP ESXi version. With the HP version, I get further in the install but get the message after 3%

"Installation operation Failed!", The installation operation has encountered a fatal error: Unable to write image to selected Disk. This may be caused by bad sectors on the device or another hardware problem"

I called HP and they said they know about the issue and hope to get a fix within 3 weeks or so. I called HP again and the tech person did not know of an issue. I tried just the ESX 4.1 not ESXi and the installation fails during the process at 44%.

BIOS: I27/p410 at 3.52

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Johan Guldmyr — Thu, 27 Jan 2011 17:38:43 GMT

Whoa, three weeks that's not awesome.

What about downgrading BIOS/controller fw?

Are you using internal disks? Maybe you do have hardware errors on them?

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Thu, 27 Jan 2011 19:22:39 GMT

I thought I may have hardware errors, but it happens on another G7 as well.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Johan Guldmyr — Thu, 27 Jan 2011 20:11:12 GMT

:/

I am not so awesome on VMWare ESX - but it is possible to upgrade?

Like if you install 4.0 and then upgrade it to 4.1 maybe that would work for you?

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Jan Soska — Fri, 28 Jan 2011 06:07:11 GMT

hello Greg,
i you use HP ESXi(last update from december), it should work. We have some amd's G7, HP ESXi is a must due missing network drivers in original vmware Esxi.
Anyway, where do you try to install it? Local sas raid? Usb key? SD card? SAN disk?
Have you tried install another OS for a test (windows/linux)

Jan

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Bart_Heungens — Fri, 28 Jan 2011 21:06:29 GMT

Hi
Yesterday I installed 3 BL460 G7 blades with ESXi 4.1 from the HP ISO from december... Worked like a charm, no issues at all...

Kr,
Bart

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Johan Guldmyr — Fri, 28 Jan 2011 21:10:32 GMT

Hey Bart. Would you be able to provide some more details of your firmwares and maybe how you install it? I think op would appreciate it :-)

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Sat, 29 Jan 2011 03:02:26 GMT

I installed using a mounted ISO as a DVD/CD. When I press F12 to see the error log on the screen, there is something about USB mass storage error. I am installing on local 146GB SAS disks. The machine has 48GB and Intel X5650 series processors. I am using the December 2010 version of ESXi from HP.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Johan Guldmyr — Sat, 29 Jan 2011 06:28:41 GMT

Hey!

So how about you try to disable the USB in BIOS?

Maybe your server has a flash card/usb drive installed?

Did you setup the RAID array before installing?

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Sat, 29 Jan 2011 23:42:59 GMT

I disabled the USB, but I don't think I disabled the correct one because it lost the virtual drives when I to try to use the ILO now. So, the keyboard and virtual media does not respond in a remote session. I may have to connect the console dongle to get to direct access to the console.

Does someone know the correct USB option in the BIOS to disable for the USB storage? The RAID was setup before the install.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Ali — Sun, 30 Jan 2011 18:11:37 GMT

HI Greg,

there are few posts about the same issue. try with ILO virtual media

make sure you have latest BIOS and controller firmware.

check this out
http://virtual-portal.com/virtualportal/?p=244

thanks,
AFtab

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Jan Soska — Mon, 31 Jan 2011 09:47:24 GMT

Greg - as written above, I forgot to mention - I've updated ILO3 firmware to latest 1.15 version... then no problem with HP ESXi iso.

Jan

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Tue, 01 Feb 2011 17:14:32 GMT

I am running ilo 1.15. We attempted to install Suse Linux as well an the install stop around 73% and the virtual seem it could not be mounted again in that session.

I called HP again and they are going to send system board replacement. I will see if that does any better. I have another G7 acting the same way.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Wed, 02 Feb 2011 16:10:27 GMT

The system board replacment got my console USB back. I decided to try another OS like Windows 2008. The install also fails during the install while expanding files. I get the message 'Windows cannot install required files. Make sure all files are required for installation are available, and restart the installation. Error code 0x80070015'. There must be something going on with the virtual media being dismounted. I tried the steps on the web site to dismount and remount during the install for VMWare but that did not work either.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Jan Soska — Wed, 02 Feb 2011 16:18:26 GMT

hello Greg, sad news.

strange idea - have you tried Java Remote Console when connecting virtual devices?

Jan

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Thu, 03 Feb 2011 15:51:55 GMT

I tried the Java as well and no luck.

I called HP again and the tech mentioned the onboard administrator needs to be higher than 3.01 to work properly with a G7 in the enclosure. I updated the onboard adminstrator to the current 3.21. The iLo is at 1.16. I started the install again and I saw the install get furhter in the install to more than just 3% before the error message, but it gave the error message later in the install 'unable to write to disk'. I will call HP back again to see what to do since the OBA update did not fix the issue.

Re: Install VMWare ESXi 4.1 on BL460C G7 Fails

Greg_IT — Mon, 07 Feb 2011 22:55:36 GMT

My temporary work around is that I used an external USB CD/DVD drive connected to the SUV cable to install the OS without issues. I am planning to send the unit to a vendor for testing on their c7000 unit.

Re: Install VMware ESXi 4.1 on BL460C G7 Fails

Ravi_S — Mon, 03 Oct 2011 12:50:07 GMT

I have the same issue installing ESXi 4.1 U1 on BL460c G7 Blade..iLO3 1.20 (11 Mar 2011)

had issue with many blades but upgrading ROM version(i27 5/5/2011) solved for 14 blades..still issue with 2 blades..

Installing on Internal SD card (set from BIOS)....iso Image downloades from HP..the same image I have successfully installed on other blades..so that should not be an issue..

Thinking to call HP support.any help would be appreciated !