https://community.hpe.com/t5/bladesystem-general/reset-connfiguration-switch-6/m-p/4747072#M12694 I need to reset the bios on a BL460c G7 because the USB keyboard on the console does not respond.<BR /><BR />I opened up the blade and flip the Switch 6 on the system board. I boot up the computer but it seems all is the same.<BR /><BR />How can I tell if the system configuration was reset? Is there another sequence of events for the procedure I am currently unable to use the keyboard on the blade either through ilo3 or SUV cable. Tue, 01 Feb 2011 21:57:48 GMT Greg_IT 2011-02-01T21:57:48Z https://community.hpe.com/t5/bladesystem-general/reset-connfiguration-switch-6/m-p/4747072#M12694 I need to reset the bios on a BL460c G7 because the USB keyboard on the console does not respond.<BR /><BR />I opened up the blade and flip the Switch 6 on the system board. I boot up the computer but it seems all is the same.<BR /><BR />How can I tell if the system configuration was reset? Is there another sequence of events for the procedure I am currently unable to use the keyboard on the blade either through ilo3 or SUV cable. Tue, 01 Feb 2011 21:57:48 GMT https://community.hpe.com/t5/bladesystem-general/reset-connfiguration-switch-6/m-p/4747072#M12694 Greg_IT 2011-02-01T21:57:48Z https://community.hpe.com/t5/bladesystem-general/reset-connfiguration-switch-6/m-p/4747073#M12695 Hi Greg,<BR />Typically, you should get screen saying System Maintenance Switch detected in ON position...telling you to put it back to OFF position.<BR />I would suggest try once again...<BR />Other thing you can try is to update BIOS if available, or use redundant ROM to boot once.<BR />You to access redundant ROM, set S1, S5, and S6 to ON.<BR /><BR />Cheers!<BR />Vaibhav<BR /> Wed, 02 Feb 2011 04:10:01 GMT https://community.hpe.com/t5/bladesystem-general/reset-connfiguration-switch-6/m-p/4747073#M12695 Vaibhav Gandhi 2011-02-02T04:10:01Z