https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792951#M13696 We just upgraded to 3.18 firmware last week and it looks like this started then. <BR /><BR />One of the Flex-10s is reporting the proper numbers but the other isn't. <BR /><BR />I'm going to reboot it tonight to see if that fixes it. Tue, 31 May 2011 12:51:01 GMT Ryan Templeton 2011-05-31T12:51:01Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792949#M13694 I have (4)685s and I'm using a Flex 10 module. In Virtual Connect I have 4 virtual nics configured at 4.5GB. Doesn't look like a problem on the VC at all. When you look at the NICs on the servers, you will see all of the NICs but 2 are running at 4.5GB and the other 2 are running at 1GB. Why would this be? Fri, 27 May 2011 19:55:41 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792949#M13694 Ryan Templeton 2011-05-27T19:55:41Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792950#M13695 For what I understood, this is not normal...<BR />If you assign too much bandwidth (like you did), normally the NICs get a percentage of what you assigned... So if you gave 4 times 4,5 Gb, it would result that all NICs would get 2,5 Gb...<BR /><BR />Did you try to change the numbers already?<BR /><BR />Which firmware do you have on VC level? Sat, 28 May 2011 20:09:49 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792950#M13695 Bart_Heungens 2011-05-28T20:09:49Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792951#M13696 We just upgraded to 3.18 firmware last week and it looks like this started then. <BR /><BR />One of the Flex-10s is reporting the proper numbers but the other isn't. <BR /><BR />I'm going to reboot it tonight to see if that fixes it. Tue, 31 May 2011 12:51:01 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792951#M13696 Ryan Templeton 2011-05-31T12:51:01Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792952#M13697 Did you try a resetvcm already with the VCSU tool? This doesn't need downtime for the blades and can solve the issue mentioned above... I am running also 3.18 and do not have this issue (checked this morning)... Tue, 31 May 2011 12:56:43 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792952#M13697 Bart_Heungens 2011-05-31T12:56:43Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792953#M13698 Ok I ran resetvcm and but that didn't correct the problem. Once VC is reporting the proper numbers while the other is still not reporting correctly. Tue, 31 May 2011 13:13:44 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792953#M13698 Ryan Templeton 2011-05-31T13:13:44Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792954#M13699 What happens when you put the NICs to Automatic? Normally then they should get all 2,5Gb? Tue, 31 May 2011 13:21:36 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792954#M13699 Bart_Heungens 2011-05-31T13:21:36Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792955#M13700 can I do that with the blades live and in a cluster? Tue, 31 May 2011 13:27:44 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792955#M13700 Ryan Templeton 2011-05-31T13:27:44Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792956#M13701 I would not do this during business hours no... You never know... Tue, 31 May 2011 13:35:32 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792956#M13701 Bart_Heungens 2011-05-31T13:35:32Z https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792957#M13702 Ok thanks. Tue, 31 May 2011 14:17:49 GMT https://community.hpe.com/t5/bladesystem-general/problem-between-server-and-virtual-connect/m-p/4792957#M13702 Ryan Templeton 2011-05-31T14:17:49Z