https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041949#M14049 I needed to remove the certificates from the browser. I was then able to get back into the iLO port. Wed, 25 Apr 2007 13:32:52 GMT MicZell 2007-04-25T13:32:52Z https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041948#M14048 I have a Proliant BL 35p blade system. I am trying to add a blade to it and connect via the iLO, but I am getting and error message:<BR />"Your certificate contains the same serial number as another certificate issued by the certificate authority. Please get a new certificate containing a unique serial number."<BR />This blade has not been used before. Has anyone else seen this?<BR /><BR />Thanks Mon, 23 Apr 2007 16:25:02 GMT https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041948#M14048 MicZell 2007-04-23T16:25:02Z https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041949#M14049 I needed to remove the certificates from the browser. I was then able to get back into the iLO port. Wed, 25 Apr 2007 13:32:52 GMT https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041949#M14049 MicZell 2007-04-25T13:32:52Z https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041950#M14050 I needed to remove the certificates from the browser. I was then able to access the iLO port. Wed, 25 Apr 2007 13:34:14 GMT https://community.hpe.com/t5/bladesystem-general/ilo-invalid-certificate/m-p/5041950#M14050 MicZell 2007-04-25T13:34:14Z