topic Re: p-GbE2 interconnect trunk 3com in BladeSystem - General

p-GbE2 interconnect trunk 3com

Luis Blanco — Mon, 28 Jan 2008 03:05:11 GMT

I have a P-GbE2 switch, and I need join to swithc 3com, trunk configuration to tap an increase in bandwidth.

Anyone know if this is possible?

Re: p-GbE2 interconnect trunk 3com

Blazhev_1 — Mon, 28 Jan 2008 19:31:01 GMT

Hi Luis,

from the 3rd party switches only Cisco is "compatible". I don't think it is possible with 3com.

Pac

Re: p-GbE2 interconnect trunk 3com

HEM_2 — Mon, 28 Jan 2008 21:43:45 GMT

p-GBE2 switches support either static trunk configuration or LACP (with updated firmware).

Either of these should be compatible with 3com switches.

What mode of aggregation do 3com's support? Static or Dynamic LACP?

Re: p-GbE2 interconnect trunk 3com

Luis Blanco — Tue, 29 Jan 2008 17:57:16 GMT

Thanks every body,

the protocol LACP save my life...

I Already achieved the configuration.

greetings

Re: p-GbE2 interconnect trunk 3com

Luis Blanco — Tue, 29 Jan 2008 17:58:31 GMT

thanks.