topic bl460c boot from san win2003 in BladeSystem - General

bl460c boot from san win2003

hturker — Fri, 13 Jun 2008 17:58:17 GMT

i booted my unix redhat4 and redhat 5 from san
but in the same conditions i cant install win2003 why
it says itcant find hard disks

Re: bl460c boot from san win2003

JKytsi — Sun, 15 Jun 2008 08:41:24 GMT

Hi again,

You are installing via single path ?
Is You LUN configured for Windows in the EVA?

Re: bl460c boot from san win2003

hturker — Mon, 16 Jun 2008 06:50:22 GMT

yes me again,
everthing is same as i install unix
now i wanted to install win2003
http://download.qlogic.com/drivers/56772/Readme_BootfromSAN.htm
in this document it says press f6 and install driver but when i press f6 from the first screen i cant reach the add device

do you know how

and secondly must i show a driver in floopy?

Re: bl460c boot from san win2003

hturker — Mon, 16 Jun 2008 06:59:06 GMT

now i come to add driver place
it says
please insert the disk labeled
manufacturer-supplieed hardware support disk into drive a
where can i find taht driver for floopy :(

Re: bl460c boot from san win2003

hturker — Tue, 17 Jun 2008 10:30:04 GMT

HP uses other descriptions for HBA than Emulex and QLogic does. The QLogic 2462 is called FC1242.

I found this information here: http://h18007.www1.hp.com/products/quickspecs/12604_div/12604_div.HTML

You can download the driver for the FC1242 here:

http://h18006.www1.hp.com/products/storageworks/pciehbaql/index.html

regards
Patrick

its solved by patrick thanks

Re: bl460c boot from san win2003

hturker — Tue, 17 Jun 2008 10:30:30 GMT

okey the solution is above