https://community.hpe.com/t5/bladesystem-general/gbe2-interconnect-switch-snmp-configuration/m-p/4101412#M1466 As of firmware version 3.20 the gbe2 switches also support SNMPv3 which brings with it different configuration parameters:<BR /><BR />[SNMPv3 Menu]<BR /> usm - usmUser Table Menu<BR /> view - vacmViewTreeFamily Table Menu<BR /> access - vacmAccess Table Menu<BR /> group - vacmSecurityToGroup Table Menu<BR /> comm - community Table Menu<BR /> taddr - targetAddr Table Menu<BR /> tparam - targetParams Table Menu<BR /> notify - notify Table Menu<BR /> v1v2 - Enable/disable V1/V2 access<BR /> cur - Display current SNMPv3 configuration<BR /><BR /><BR />There are up to 16 communities and up to 32 vacms that can be defined.<BR /><BR />I'm not an SNMP expert so not sure if this helps you... Tue, 13 Nov 2007 08:37:10 GMT HEM_2 2007-11-13T08:37:10Z https://community.hpe.com/t5/bladesystem-general/gbe2-interconnect-switch-snmp-configuration/m-p/4101411#M1465 We have numerous racks of BL20p G2's. The GBE2 A and B interconnect switches are now being managed by our Network Operations Team. I am trying to get the switches to detect in SIM but have found that the SNMP config on them has been locked down. Our Net Ops team have told me the switches cannot support multiple SNMP ACLs so they cannot add the read strings I need for SIM to see the switches - is this right? Any advice/Comments gratefully received. Tue, 13 Nov 2007 06:55:33 GMT https://community.hpe.com/t5/bladesystem-general/gbe2-interconnect-switch-snmp-configuration/m-p/4101411#M1465 Bob Curnock 2007-11-13T06:55:33Z https://community.hpe.com/t5/bladesystem-general/gbe2-interconnect-switch-snmp-configuration/m-p/4101412#M1466 As of firmware version 3.20 the gbe2 switches also support SNMPv3 which brings with it different configuration parameters:<BR /><BR />[SNMPv3 Menu]<BR /> usm - usmUser Table Menu<BR /> view - vacmViewTreeFamily Table Menu<BR /> access - vacmAccess Table Menu<BR /> group - vacmSecurityToGroup Table Menu<BR /> comm - community Table Menu<BR /> taddr - targetAddr Table Menu<BR /> tparam - targetParams Table Menu<BR /> notify - notify Table Menu<BR /> v1v2 - Enable/disable V1/V2 access<BR /> cur - Display current SNMPv3 configuration<BR /><BR /><BR />There are up to 16 communities and up to 32 vacms that can be defined.<BR /><BR />I'm not an SNMP expert so not sure if this helps you... Tue, 13 Nov 2007 08:37:10 GMT https://community.hpe.com/t5/bladesystem-general/gbe2-interconnect-switch-snmp-configuration/m-p/4101412#M1466 HEM_2 2007-11-13T08:37:10Z