topic Re: Virtual connect manager in BladeSystem - General

Virtual connect manager

salem_3 — Sun, 05 Oct 2008 20:33:00 GMT

Hello

I have C7K encluser with 02 VC-E in bay 1&2 ,
02 VC-FC in bay 5&8 and 14 BL460 ,
When i'm connecting to VC manager from OA i'm get the error "Active Virtual Connect Manager not at this IP address" from VCM GUI .

Is there another way to get access to VCM ,or how to fix that ?

Thanks ,

Re: Virtual connect manager

kris rombauts — Mon, 06 Oct 2008 08:23:04 GMT

Ryadh,

can you check what IP address the VC Ethernet module in bay 1 has got by looking at the EBIPA details in the OA GUI ?

If that is different then the one the hyperlink in the OA GUI send you to, then try to go to that IP address directly.

HTH

Kris

Re: Virtual connect manager

cjb_1 — Mon, 06 Oct 2008 10:52:29 GMT

Have you tried going to the second VC bay? Try each VC enet module management console from the interconnect bays tab on OA.

Assume you've not got a virtual connect domain ip configured yet?

Re: Virtual connect manager

salem_3 — Tue, 07 Oct 2008 19:42:25 GMT

You are right Kris ,after checking the EBIPA details for the interconnect i found the address that i have to use to connect with .

Thanks .