https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136222#M15067 Ok my mistake I had not read that clearly. You are of course correct I had read it as being a requirement of the Windows version of the PSTool Mon, 20 Oct 2008 07:51:40 GMT BelaGuez 2008-10-20T07:51:40Z https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136220#M15065 As per the customer advisory HP sent out at the end of last month I'm trying to identify power supplies that may require replacement.<BR /><BR />Two of the chassis are running firmware 2.20 and for various reasons a firmware update to 2.25 in order to use the Windows based PSTool utility is not feasible. Given this I am trying to use the Linux based tool. I am by no means at all familure with Linux but I have access to a Ubuntu machine on the network that meets all the perl, expect and net::ping requirements yet when I run the ./oa.pl script I get the following<BR /><BR />SCAN OF 0 OA's COMPLETED SUCCESSFULLY<BR />Identified 0 power supplies for replacement<BR />Skipped 2 OA's during scan<BR />Unable to contact 0 OA's<BR /><BR />From which I take that it is able to contact my OA's as it does not say its unable to contact them but for some reason its skipping over them.<BR /><BR />There are no logs of any use provided with the scripts from HP. Does anyone know how I can troubleshoot why the OA's are being skipped? Sun, 19 Oct 2008 23:00:11 GMT https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136220#M15065 BelaGuez 2008-10-19T23:00:11Z https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136221#M15066 script instructions specify that you _must_ have SSH keys for the OAs available in scanning host. <BR /><BR />You can aquire those for example with putty session to OA. Mon, 20 Oct 2008 05:42:27 GMT https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136221#M15066 JKytsi 2008-10-20T05:42:27Z https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136222#M15067 Ok my mistake I had not read that clearly. You are of course correct I had read it as being a requirement of the Windows version of the PSTool Mon, 20 Oct 2008 07:51:40 GMT https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136222#M15067 BelaGuez 2008-10-20T07:51:40Z https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136223#M15068 Tested and working Mon, 20 Oct 2008 07:52:44 GMT https://community.hpe.com/t5/bladesystem-general/pstool-power-supply-identification-utility-for-linux-vmware/m-p/5136223#M15068 BelaGuez 2008-10-20T07:52:44Z