topic Re: BL460c cluster using EVA in BladeSystem - General

BL460c cluster using EVA

dyl8n — Tue, 04 Nov 2008 16:34:59 GMT

Here are the hardware specs:

2 x BL460c each with Mezz1 Dual NiCs, Mezz2 Emulex HBA; Win2008 Ent x64.

Presented to both server 1GB Quorum and 100GB Virtual Disk partition from the EVA. These volumes are shared between the 2 servers.

When running cluster validation following were cancelled:

Disk arbitration
Disk Failover
File System
Multiple Arbitration
Simultaneous Failover

And SCSI-3 Persistent Reservation has status of Failed.

I'm looking to setup failover cluster Hypver-V. Is there any type of document from HP on how this can be done?

Thanks.

Re: BL460c cluster using EVA

dyl8n — Tue, 04 Nov 2008 17:25:17 GMT

Change host type to 00000004198009A8 in Command View fixed it.

Re: BL460c cluster using EVA

SteveMacNZ — Wed, 05 Nov 2008 00:15:32 GMT

make sure that the LUNs you are presenting to the win 2008 clusters are set to windows 2008 in command view, on the new version this is a drop down. if windows server is selected your validation report will alway fail.