topic Re: Dynamic Processor Resiliency on Blade 870c in BladeSystem - General

Dynamic Processor Resiliency on Blade 870c

abdul_aziz — Wed, 21 Apr 2010 03:40:02 GMT

We have a case reported to HP regarding our server HP integrity Blade 870c. After checked by engineer, the report mentioned the crash because of error on CPU 0. From product information of Blade 870c (http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/3709945-3709945-3710102-1146345-3722789-3676868.html), it says that Dynamic Processor Resiliency able to de-allocate CPUs, online, any processor that exhibits an unacceptable level of correctable errors. My questions are:
1. Whether any processor means except CPU 0
2. Whether member of this forum has similar experienced also?

Thanks!

Re: Dynamic Processor Resiliency on Blade 870c

Benoy Daniel — Wed, 21 Apr 2010 23:58:27 GMT

yes.. it is CPU0

Re: Dynamic Processor Resiliency on Blade 870c

abdul_aziz — Thu, 22 Apr 2010 04:04:29 GMT

Hi Benoy, just want to clarify so basically DPR works except in CPU 0? eventhough it says in website works on any processor?
Thanks

Re: Dynamic Processor Resiliency on Blade 870c

Benoy Daniel — Thu, 22 Apr 2010 21:12:44 GMT

I mean as you mentioned above the engineer said it is CPU 0 is defective.. DPR should support all processor in the system.

Re: Dynamic Processor Resiliency on Blade 870c

abdul_aziz — Mon, 26 Apr 2010 05:53:40 GMT

Thanks for your reply.

Re: Dynamic Processor Resiliency on Blade 870c

abdul_aziz — Mon, 26 Apr 2010 05:59:11 GMT

Partially solved