https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264987#M17085 Uninstall and reinstall the NCU. Wed, 01 Dec 2010 21:37:10 GMT DonSmith0271 2010-12-01T21:37:10Z https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264985#M17083 I updated four of our exchange servers last night with firmware 9.20 and PSP 8.6. These servers have existing teams established. After the upgrade I wanted to test the nic teaming on all of the servers. The team software opened but when I clicked on the team itself the properties options did not "turn on" and allow me to look at the properties. When I tried to close the application it errors out and then disappears from the system tray. The application log for this shows the following error: Wed, 01 Dec 2010 20:32:12 GMT https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264985#M17083 DonSmith0271 2010-12-01T20:32:12Z https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264986#M17084 Faulting application cpqteam.exe, version 10.10.0.11, time stamp 0x4c506d31, faulting module cqnicui.dll, version 10.10.0.11, time stamp 0x4c506cf0, exception code 0xc0000005, fault offset 0x000000000004edd4, process id 0x2238, application start time 0x01cb91933c44b830.<BR /><BR />Our servers are BL685c G5 running Windows 2008 x64 with SP2.<BR /><BR />Any help would be appreciated. Thanks. Wed, 01 Dec 2010 20:49:33 GMT https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264986#M17084 DonSmith0271 2010-12-01T20:49:33Z https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264987#M17085 Uninstall and reinstall the NCU. Wed, 01 Dec 2010 21:37:10 GMT https://community.hpe.com/t5/bladesystem-general/cpqteam-errors/m-p/5264987#M17085 DonSmith0271 2010-12-01T21:37:10Z