topic Re: cluster BL870c-OA login in BladeSystem - General

cluster BL870c-OA login

kuzo_1 — Wed, 09 Mar 2011 22:54:08 GMT

I have a new c7000 with two servers blade to install with a cluster BL870c . but I have problem to the config of Enclosuer. where can I find the login of the OA. I did not see it on stiker to the enclosure. it is with license Key whom I am going to have him(it)?

KUZO

Re: cluster BL870c-OA login

Steven Clementi — Thu, 10 Mar 2011 03:01:25 GMT

On the OA, there is a pull out tab. It's gray graphite in color i think. Look on the back of the enclosure at the OA.

On the Tab is the default password and name.

Steven

Re: cluster BL870c-OA login

Torsten. — Thu, 10 Mar 2011 06:38:42 GMT

Normally there should be a sticker with the login credential written on it. However, if you pull the OA (left is primary by default) the login is written on the bottom side.
If you pull and push it back, the other OA became active meanwhile.

Re: cluster BL870c-OA login

David Claypool — Thu, 10 Mar 2011 14:27:26 GMT

If all else fails you can connect to the OA via a serial cable and do a password recovery. See the User Guide for details.

Re: cluster BL870c-OA login

kuzo_1 — Sun, 13 Mar 2011 00:02:23 GMT

Tanks