https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278709#M17347 As the subject states, I have a C7000 enclosure, two VC flex-10s, two 8/24 FC-VCs.<BR /><BR />Everything was working fine until one day Checkpoint errors came along. I also get stacking link errors and cant see my flex-10 ports.<BR /><BR />I reset, reseated and cleared the config/profile for OA, VC domain, etc. I have replaced the OA module and the Flex-10 modules. Once replaced now the stacking link errors are gone (I have yet to update firmware on anything) but I still get errors communicating with OA and overall status failures. The constant is the Checkpoint pending or not valid error.<BR /><BR />I am at a loss. Now if I try to create a ethernet network I cannot add any ports to it because it wont show the flex10 ports. The interconnect modules constantly lose OA communication and overall status failures. I have cleared all configs I can think of, I have replaced all hardware I can think of and still nothing.... ANY ideas what could be going on? Tue, 05 Apr 2011 14:49:04 GMT mujzeptu 2011-04-05T14:49:04Z https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278709#M17347 As the subject states, I have a C7000 enclosure, two VC flex-10s, two 8/24 FC-VCs.<BR /><BR />Everything was working fine until one day Checkpoint errors came along. I also get stacking link errors and cant see my flex-10 ports.<BR /><BR />I reset, reseated and cleared the config/profile for OA, VC domain, etc. I have replaced the OA module and the Flex-10 modules. Once replaced now the stacking link errors are gone (I have yet to update firmware on anything) but I still get errors communicating with OA and overall status failures. The constant is the Checkpoint pending or not valid error.<BR /><BR />I am at a loss. Now if I try to create a ethernet network I cannot add any ports to it because it wont show the flex10 ports. The interconnect modules constantly lose OA communication and overall status failures. I have cleared all configs I can think of, I have replaced all hardware I can think of and still nothing.... ANY ideas what could be going on? Tue, 05 Apr 2011 14:49:04 GMT https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278709#M17347 mujzeptu 2011-04-05T14:49:04Z https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278710#M17348 Check this customer advisory<BR /><BR /><BR /><A href="http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02720395" target="_blank">http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02720395</A><BR /><BR /> Tue, 05 Apr 2011 23:11:36 GMT https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278710#M17348 Jimmy Vance 2011-04-05T23:11:36Z https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278711#M17349 Firmware updates did it. I believe this advisory was the cause.<BR /> Tue, 05 Apr 2011 23:36:03 GMT https://community.hpe.com/t5/bladesystem-general/checkpoint-pending-or-not-valid-c7000-enclosure-two-vc-flex-10s/m-p/5278711#M17349 mujzeptu 2011-04-05T23:36:03Z