https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284378#M17440 Personally, I would use VCSU, and let the utility decide whether the upgrade path is OK. Also let VCSU do all modules in one pass, it is smart enought to know the correct order in which to do them.<BR /><BR />Dave. Thu, 09 Jun 2011 16:43:09 GMT The Brit 2011-06-09T16:43:09Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284377#M17439 Good day<BR /><BR />Just want confirmation that the below is the correct path when upgrading virtual connect firmware.<BR /><BR />1) Only do one virtual connect at a time<BR />2) Do not skip more that two versions so:<BR />a - first upgrade from 2.34 to 3.10<BR />b - second upgrade from 3.10 to 3.18 (current latest)<BR /><BR />Cheers!<BR /> Thu, 09 Jun 2011 13:34:54 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284377#M17439 cosonok 2011-06-09T13:34:54Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284378#M17440 Personally, I would use VCSU, and let the utility decide whether the upgrade path is OK. Also let VCSU do all modules in one pass, it is smart enought to know the correct order in which to do them.<BR /><BR />Dave. Thu, 09 Jun 2011 16:43:09 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284378#M17440 The Brit 2011-06-09T16:43:09Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284379#M17441 Got it confirmed by HP twice. The entry in the question is a supported path. Fri, 10 Jun 2011 09:23:15 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284379#M17441 cosonok 2011-06-10T09:23:15Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284380#M17442 As stated in question. Fri, 10 Jun 2011 09:24:08 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-update-path-from-f-w-2-34-to-3-18/m-p/5284380#M17442 cosonok 2011-06-10T09:24:08Z