https://community.hpe.com/t5/bladesystem-general/gbe2c-ip-routing/m-p/4117967#M1757 I setup IP routing on the GbE2c Layer 2/3 Ethernet Blade Switch. From the switch I can pink all my subnets and gateway.<BR /><BR />But when I go to the server in a subnet I am not able to ping any server unless its default gw on the box is set to the GbE2c Layer 2/3 Ethernet Blade Switch. <BR /><BR />That would be fine, but my other subnetts are not able to get on the internet.<BR /><BR />Any suggests? Tue, 18 Dec 2007 01:45:09 GMT Marcale 2007-12-18T01:45:09Z https://community.hpe.com/t5/bladesystem-general/gbe2c-ip-routing/m-p/4117967#M1757 I setup IP routing on the GbE2c Layer 2/3 Ethernet Blade Switch. From the switch I can pink all my subnets and gateway.<BR /><BR />But when I go to the server in a subnet I am not able to ping any server unless its default gw on the box is set to the GbE2c Layer 2/3 Ethernet Blade Switch. <BR /><BR />That would be fine, but my other subnetts are not able to get on the internet.<BR /><BR />Any suggests? Tue, 18 Dec 2007 01:45:09 GMT https://community.hpe.com/t5/bladesystem-general/gbe2c-ip-routing/m-p/4117967#M1757 Marcale 2007-12-18T01:45:09Z https://community.hpe.com/t5/bladesystem-general/gbe2c-ip-routing/m-p/4117968#M1758 It sounds like a routing issue... Im not really familiar with the GbE2c, but if its a layer2/3 dont you need to add routing protocols... OSPF? Tue, 18 Dec 2007 02:48:24 GMT https://community.hpe.com/t5/bladesystem-general/gbe2c-ip-routing/m-p/4117968#M1758 Lmm_1 2007-12-18T02:48:24Z