topic Re: HP Blade Server in BladeSystem - General

HP Blade Server

jasoncal10 — Thu, 08 Sep 2011 19:03:39 GMT

I am new to setting up a Blade Server and I am looking for some help on getting started. I have a HP Blade system with a p-class enclosure 6U. I have several HP BL25p G2, BL35p and 2 Cisco GESM intrerconnects.

I have the whole system racked and powered on. The next step is where I am having issues. There is no input for for monitor or keyboard/mouse. I realized I will need a local i/o cable in order to do any configurations. Where can i find a part no to order one?

Is there any other way to configure the server without the local i/o cable using remote management?

Next question is how to recover a password for the cisco interconnects?

Any other documentation to help me start this or management software I will need would be most helpful.

Thank you,

Jason

Re: HP Blade Server

Robert_Jewell — Fri, 09 Sep 2011 15:11:10 GMT

I am not hands on familiar with the P Class, but there should be a management LAN interface you can point a web browser at. Here is the documentation site for the enclosure:

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&taskId=101&prodClassId=-1&contentType=SupportManual&docIndexId=64255&prodTypeId=3709945&prodSeriesId=254521

Here is the part for the local IO SUVI cable: http://partsurfer.hp.com/Search.aspx?SearchText=355935-001

-Bob

Re: HP Blade Server

Suman_1978 — Mon, 12 Sep 2011 03:12:09 GMT

Hi,

Regarding recovering CISCO switch password, I am not sure what type of switch you are using. What is the model?

But here are some resources from HP and CISCO.

Cisco Catalyst 1/10GbE 3120X Blade Switch - Recovering Switch From Lost or Forgotten Password
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02571384

http://www.cisco.com/en/US/docs/switches/blades/3020/software/release/12.2_55_se/configuration/guide/swtrbl.html

Hope this information helps.

Thanks.