https://community.hpe.com/t5/bladesystem-general/some-errors-in-iml/m-p/3948455#M180 can you update with more info:<BR />type of interconnects at A and B side, cube modules ? <BR />Enclosure firmware <BR />can you reseat B side Interconnect and all modules ? <BR />Any RED LED on the Management Module ? <BR />swap Cube module from B side to any other enclosure or A side check if problem follow one of them <BR /> Wed, 21 Feb 2007 14:51:23 GMT Oleg Koroz 2007-02-21T14:51:23Z https://community.hpe.com/t5/bladesystem-general/some-errors-in-iml/m-p/3948454#M179 on BL20p G2 I get this error in the IML log: <BR />Infrastructure Fault, Interrupt Error at Interconnect Blade B, Unknown<BR />and <BR />Infrastructure Fault, Interrupt Error at RJ45 10 East, Unknown<BR />that the error could mean?<BR /> Wed, 21 Feb 2007 02:20:17 GMT https://community.hpe.com/t5/bladesystem-general/some-errors-in-iml/m-p/3948454#M179 b00genator 2007-02-21T02:20:17Z https://community.hpe.com/t5/bladesystem-general/some-errors-in-iml/m-p/3948455#M180 can you update with more info:<BR />type of interconnects at A and B side, cube modules ? <BR />Enclosure firmware <BR />can you reseat B side Interconnect and all modules ? <BR />Any RED LED on the Management Module ? <BR />swap Cube module from B side to any other enclosure or A side check if problem follow one of them <BR /> Wed, 21 Feb 2007 14:51:23 GMT https://community.hpe.com/t5/bladesystem-general/some-errors-in-iml/m-p/3948455#M180 Oleg Koroz 2007-02-21T14:51:23Z