topic Flex10 Performance issue in BladeSystem - General

Flex10 Performance issue

jmquesadarivel — Mon, 30 Jan 2012 17:50:52 GMT

Hello,

data of2 Blades from different enclosures/VC network speed is good, data of 2 Blades from the same enclosure/VC is poor.

No internal networks, all 4 Flex are connected via LACP 4Gbps to 2 Stacked Cisco 3750-G.

How can I monitor the performance of the VC and/or can find the root cause to this network issue?

reagrds,

Re: Flex10 Performance issue

JD-WFH — Mon, 06 Feb 2012 18:38:50 GMT

If you have an open port on one of you Flex modules, you can turn on port monitoring and check out the traffic from there. I've only recently started doing this.

Also, the monitored port LED turns blue!

Re: Flex10 Performance issue

jmquesadarivel — Mon, 06 Feb 2012 18:58:15 GMT

thanks JD for your answer, question, have to tried this on agrregated ports (LACP ports)?