topic Re: After take ghost Mac address Problem in BladeSystem - General

After take ghost Mac address Problem

shafeygado — Sun, 19 Feb 2012 07:46:25 GMT

Dears

I notice that when i take a ghost backup from my server and restore that ghost on clone server ( the Mac Address for Clone server not updated take same mac address for Main server

My server : HP Prolaint BL460C G1 & Windows 2003

Re: After take ghost Mac address Problem

杏仁 — Sun, 19 Feb 2012 14:43:35 GMT

Every nic have a Mac address unique，whenever clone or ghost。

Re: After take ghost Mac address Problem

TVVJ — Mon, 20 Feb 2012 14:49:46 GMT

Please refer to the following advisory which speaks about this issue:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00814030&lang=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

Try updating the BIOS of the server to the latest. As this is a Blade server, ensure that the firmware of the enclosure is at BladeSystem Release sets. Information about this is available at:

http://hp.com/go/bladesystemupdates

Regards,

Vijayasarathy