https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103542#M18290 <!--!*#-->After a FW update, the Insight Display in my BL860c has a USB Menu choice for FW update, save/restore configuration. Is this the USB on the face of the blade, the USB port internal to the blade, either or are they the same port? Thanks.<BR /> Connie Emmen<BR /> HP Education Services Thu, 27 Aug 2009 15:57:21 GMT Constance Emmen 2009-08-27T15:57:21Z https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103542#M18290 <!--!*#-->After a FW update, the Insight Display in my BL860c has a USB Menu choice for FW update, save/restore configuration. Is this the USB on the face of the blade, the USB port internal to the blade, either or are they the same port? Thanks.<BR /> Connie Emmen<BR /> HP Education Services Thu, 27 Aug 2009 15:57:21 GMT https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103542#M18290 Constance Emmen 2009-08-27T15:57:21Z https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103543#M18291 It's just used save "CMOS Configuraton Setting" to External USB Disk. Fri, 28 Aug 2009 04:15:43 GMT https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103543#M18291 zhanggr 2009-08-28T04:15:43Z https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103544#M18292 Questions on Integrity Servers or HP BladeSystem should be made in the ITRC forum:<BR /><A href="http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=775" target="_blank" rel="nofollow">http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=775</A><BR /><A href="http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=275" target="_blank" rel="nofollow">http://forums.itrc.hp.com/service/forums/categoryhome.do?categoryId=275</A><BR /> Sun, 18 Oct 2009 18:27:41 GMT https://community.hpe.com/t5/bladesystem-general/bl860c-usb/m-p/1103544#M18292 Dennis Handly 2009-10-18T18:27:41Z