KVM Module connecting to blade problem

solnx — Mon, 29 Apr 2013 21:44:50 GMT

I get this error trying to connect to a blade using the KVM module. I 'm able to power on and off but not the blade...

"Could not Connect Error (0xfffffff...) Wait a few seconds and try again"

Re: KVM Module connecting to blade problem

Renjiv — Mon, 29 Apr 2013 22:07:38 GMT

Hello,

This error message occur due to OA fimware . If the OA firmware is not updated, you may try updating the OA firmware.

A future version of HP Onboard Administrator will prevent this issue from occurring.

As a workaround, perform either of the following:

Connect the keyboard/video/mouse directly to the server blade via the SUV port.

Use the ILO IRC (Integrated Remote Console) web interface. This also requires a workstation with a web browser and iLO network access.

Regards,

Renji V