topic Onboard Administrator different models in BladeSystem - General

Onboard Administrator different models

Juan M Leon — Wed, 10 Jul 2013 12:40:24 GMT

Good morning, I have a HPC7000 chassis with 4 BL860ci2 and the rest are BL460c G7 and G8.

The chassis currently have primary OA product number 412142-B21. the second OA is empty, the company recently purchased (I don't know how long) an OA product number 456204-B21 this is OA with KVM option.

I was told that the second OA is not recognized or does not work.

I would like to see if someone has run into similar configuration (two different OA models)

I will do the following steps to identify if compatibility issues or problems with the second OA

- insert the second OA (456204-B21)

- remove primary OA (412142-B21) to see if the second OA becomes active

- remove primary OA and replace it with secondary OA

Any other suggestions or recommendations to do this will be appreciated.

Thank you

Juan

Re: Onboard Administrator different models

Robert_Jewell — Wed, 10 Jul 2013 21:42:13 GMT

I got a couple of hits when searching for "mixing OA module":

http://h30499.www3.hp.com/t5/HP-BladeSystem-Management/Onboard-Administrator-module-replacement-to-DDR2-KVM-OA/m-p/5800275/

http://h30499.www3.hp.com/t5/HP-BladeSystem-Management/Onboard-Administrator-OA-Parts-compatability/m-p/4820045/

Basically, it seems that this would work OK, but the advise is to keep the newer style module as the primary.

-Bob

Re: Onboard Administrator different models

Juan M Leon — Wed, 24 Jul 2013 14:28:23 GMT

ok, it turned out that the error was a mismatch configuration and the OA was in degrated state.

The firmware version on the second OA was 3.2x, after upgrade the firmaware I was able to bring the second OA to a ok state. all is working now.