ipmitool with ilo4

lifams — Tue, 30 Jul 2013 17:00:28 GMT

Hi,

when trying to call

ipmitool lan print 2

on a server with iLO4 i get following output:

Set in Progress         : Set Complete
Auth Type Support       :
IP Address Source       : DHCP Address
IP Address              : X.X.X.X
Subnet Mask             : 255.255.255.224
MAC Address             : X.X.X.X.X.X
BMC ARP Control         : ARP Responses Enabled, Gratuitous ARP Disabled
Default Gateway IP      : X.X.X.X
802.1q VLAN ID          : Disabled
802.1q VLAN Priority    : 0
Cipher Suite Priv Max   : Not Available

that is, no Auth Type support is listed;

when I try to set Auth Type to MD5 with

ipmitool lan set 2 auth MD5 -vv

I get:

Using ipmi device 0
Set IPMB address to 0x20
Running PICMG GetDeviceLocator
No PICMG Extenstion discovered, keeping IPMB address 0x20
Channel type: 802.3 LAN
Channel type: 802.3 LAN

but "ipmitool lan print 2"

still returns empty Auth Type Support field.

Has anybody expirienced this problem ?

the server in question is HP BL460c gen8

OS: RHEL 6.4

ipmitool version is 1.8.11

topic ipmitool with ilo4 in BladeSystem - General

ipmitool with ilo4