Fully loaded C3000 AMP usage

TDH24 — Wed, 09 Oct 2013 19:20:52 GMT

Hello all,

We are looking at implementing a C3000 chassis. Along with the new chassis, we are implementing a Symmetra UPS that has four 30AMP connections and eight 20AMP connections. We will split the six power cords from the C3000 among two PDUs connected to the Symmetra but I don't know if we should use 20AMP PDUs or the 30AMP? Can anyone tell me how much amperage the C3000 would use if it was fully loaded?

Thanks in advance!

Troy

Re: Fully loaded C3000 AMP usage

Robert_Jewell — Thu, 10 Oct 2013 18:26:53 GMT

Product Bullitens (Quick Specs) is good for that type of info.

http://h18000.www1.hp.com/products/quickspecs/productbulletin.html#!spectype=worldwide&type=html&docid=12790

Look under Power Specs.

-Bob

topic Fully loaded C3000 AMP usage in BladeSystem - General

Fully loaded C3000 AMP usage

Re: Fully loaded C3000 AMP usage