https://community.hpe.com/t5/bladesystem-general/blade-server-ilo-no-responding/m-p/6631950#M19656 <P>That looks good to me.</P><P>&nbsp;</P><P>Another option is if you have HPONCFG installed in your OS, you can run that with the /reset flag to factory default the iLO (which will then be DHCP)</P><P>&nbsp;</P><P>In Windows Server for example the file would be under:</P><P>C:\Program Files\HP\hponcfg</P> Sat, 27 Sep 2014 22:52:08 GMT Casper42 2014-09-27T22:52:08Z https://community.hpe.com/t5/bladesystem-general/blade-server-ilo-no-responding/m-p/6593440#M19620 <P>I need to regain access to this server's iLo but I can not take it down.&nbsp; Is this all I need to do?</P><P>&nbsp;</P><P>SSH to the OA and login with the same credentials you use on the web login.<BR />CONNECT SERVER X</P><P>Where X is the Blade's slot number.<BR />That will get you into the iLO Smash CLP string.</P><P><BR />Then run this next command to turn DHCP mode back on.<BR />set /map1/dhcpendpt1 EnabledState=yes</P><P>&nbsp;</P> Fri, 29 Aug 2014 17:26:04 GMT https://community.hpe.com/t5/bladesystem-general/blade-server-ilo-no-responding/m-p/6593440#M19620 sdf2sjk 2014-08-29T17:26:04Z https://community.hpe.com/t5/bladesystem-general/blade-server-ilo-no-responding/m-p/6631950#M19656 <P>That looks good to me.</P><P>&nbsp;</P><P>Another option is if you have HPONCFG installed in your OS, you can run that with the /reset flag to factory default the iLO (which will then be DHCP)</P><P>&nbsp;</P><P>In Windows Server for example the file would be under:</P><P>C:\Program Files\HP\hponcfg</P> Sat, 27 Sep 2014 22:52:08 GMT https://community.hpe.com/t5/bladesystem-general/blade-server-ilo-no-responding/m-p/6631950#M19656 Casper42 2014-09-27T22:52:08Z