topic Re: Backup from C7000 in BladeSystem - General

Backup from C7000

EdisonTPJ — Fri, 10 Apr 2015 12:29:44 GMT

We have one C7000 chassis withOA module. chassis is filled with 8 blade, two blade with RHL and 5 blade with win 2012 server. please let me know how to take back-up from Win 2012 server.

thanks

Re: Backup from C7000

lholling — Tue, 28 Apr 2015 02:50:55 GMT

Hi EdisonTPJ

I am going to assume that you want to backup the c7000 enclosure settings pf the Onboard Administrator.

In order to do this you need to login to the OA with an Admin userid and then

Enclosure Information -> Enclosure Settings -> Configuration Scripts and then click on SHOW CONFIG link. This will then present a page with all the configuration information. You can save to a text file in order to reconfigure if you lose the OA configuration on THIS same chassis only.

If you wish to use on another chassis you will need to remove the information from the file such as Asset Tag, Enclosure Name, Static IP Addresses and EBIPA Settings.

Leonard...

Re: Backup from C7000

akash1980 — Sun, 17 Jul 2016 21:49:06 GMT

Here are the steps with screenshots to take HP Onboard Administrator backup and restore
http://virtualcloudzz.blogspot.com.au/2013/11/hp-on-board-administrator-backup.html?m=1

Hope it helps..

Cheers

Re: Backup from C7000

Paritosh_verma — Fri, 27 Jan 2017 10:22:44 GMT

Hi, suppose I going to setup a data center and there I need to install lots of chassis and much configuration is similar in all chassis. so is there possible that I could take a backup copy from a chassis where I made all configuration and then I can deploy to all chassis and that can make easy to configure.