https://community.hpe.com/t5/bladesystem-general/virtual-connect-pass-through-module/m-p/6918362#M20279 <P>Hello,</P><P>We have c7000 with VC Flex-10 enet module, it works fine. Now there is need to receive mirroring traffic on VM within enclosure. I've found out HP VC doesn't provide this function (here is a post somewere&nbsp;on this forum). Installing pass through module could work around this problem.</P><P>Could we use conjunction of&nbsp;this modules, is it possible? We need just one virtual NIC in one blade server managed by pass through module. Any suggestions will be appreciated.&nbsp;</P><P>Thank you</P> Thu, 17 Nov 2016 11:08:27 GMT Anover 2016-11-17T11:08:27Z https://community.hpe.com/t5/bladesystem-general/virtual-connect-pass-through-module/m-p/6918362#M20279 <P>Hello,</P><P>We have c7000 with VC Flex-10 enet module, it works fine. Now there is need to receive mirroring traffic on VM within enclosure. I've found out HP VC doesn't provide this function (here is a post somewere&nbsp;on this forum). Installing pass through module could work around this problem.</P><P>Could we use conjunction of&nbsp;this modules, is it possible? We need just one virtual NIC in one blade server managed by pass through module. Any suggestions will be appreciated.&nbsp;</P><P>Thank you</P> Thu, 17 Nov 2016 11:08:27 GMT https://community.hpe.com/t5/bladesystem-general/virtual-connect-pass-through-module/m-p/6918362#M20279 Anover 2016-11-17T11:08:27Z